Three basic Scorpion systems are described below. They will satisfy the requirements of most coolant applications, and can be ordered by the 4-digit numbers given in the descriptions. However, to order a system with additional options see "Configure Part Number" and/or refer to our catalog.
System 8001: Single nozzle with manual on/off control.
Can be ordered with 2, 3, or 4 nozzles by changing the last digit to the number of nozzles wanted. For example, a 3-nozzle system would be ordered by number 8003.
System 8301: Single nozzle with solenoid on/off control, 110 volts, 50/60 Hz.
Can be ordered with 2, 3, or 4 nozzles by changing the last digit to the number of nozzles wanted. For example, a 4-nozzle system would be ordered by number 8304.
System 8501: Single nozzle with solenoid on/off control with blowoff feature, 110 volts, 50/60 Hz.
Can be ordered with 2, 3, or 4 nozzles by changing the last digit to the number of nozzles wanted. For example, a 2-nozzle system would be ordered by number 8502.
Our Servo-Meter Injector has a 1-Drop capacity. Optional 2-drop and 1/2 -drop capacities.
Up to four injectors and nozzles can be used.
Patented blowoff feature.
Snaplock coolant dispensing nozzle. Optional copper nozzles.
Braided PVC hose.
Magnetic nozzle base.
10-Ounce capacity coolant reservoir.
NPTF port threads; optional BSPP threads
Ambient/Media Temperature: 40° to 125°F (4° to 52°C).
Body Blocks: Anodized aluminum.
Hose: 6-Ft braided PVC; longer or shorter hose optional in 1-foot increments.
Injector: 1 drop rated Servo-Meter; 0 to 0.027 ml per pulse.
Optional 2 drop rated Servo-Meter; 0 to 0.060 ml per pulse.
Injection frequency up to 100 pulses per minute.
Servo-Meter Body: 1-Drop (0.030ml)rating per pulse; optional 1/2-drop (0.015ml) or 2-drop (0.060ml)rating per pulse.
Inlet Port: 1/4 NPTF; optional 1/8 NPTF and BSPP threads.
Inlet Pressure: 60 to 120 psig (4 to 8 bar).
Nozzle: Snaplock® with12-inch ﬂexible segmented plastic. Optional 18-inch or 24-inch lengths. Optional copper nozzles.
On/Off Control: Manual. Optional solenoid control with or without blowoff feature.
Reservoir: Integral semi-clear polypropylene with 10-ounce (300 ml) capacity. Optional 1-quart and 2-quart capacities, and no-reservoir (for use with remote reservoir).
Seals: Air seals are nitrile; Oil seals are Viton.
Solenoid Voltages: (With optional solenoid) 110 or 220 volts, 50/60 Hz; 24 volts D.C.