ISO 9001 Registered | Member: NFPA and FPDA  |   |   |   | 
 |   |   |   |   |   |   | 
70G01104A (Muffler on reverse side from label. Bolts and washers not shown)
Servo-Meter 70 Model for use with 73 Series MPLs
Overview
Photos
Service Kits & Literature
Description:
SERVO-METERS are the key modules used in all SERV-OIL equipment; single point and multiple point lubricators. They are precision, positive displacement liquid injectors which are actuated by an air pressure signal of at least 60 psig (4 bar). A 1/8 inch, oil filled nylon line carries the injected oil from each Servo-Meter to a point of lubrication. Servo-Meters in single point lubricators have a flow actuated ball in the sight indicator at one end of the servo-meter to give visual verification of oil delivery. Ball check valves at the ends of the nylon lines ensure that the lines and the oil sides of servo-meter remain full of oil and free of air.
Features:
Servo-Meters are available in three capacities with maximum flows of 1/2 drop, 1 drop and 2 drops. The maximum amount can be reduced in increments of 1/50th of its rated capacity. With the aid of pulse counters and controllers the lubrication can be reduced even further by selecting the frequency of oil injection.


(1 Drop = 1/30 cc)

Maximum Output      Reducing Increments    Minimum Output
1/2 Drop                 1/100 Drop               1/20 Drop                                                                           1    Drop                 1/50   Drop               1/10 Drop
2    Drop                 1/25   Drop               1/5  Drop
© 2018 Master Pneumatic, Inc., Privacy Policy, Legal Statement